Conveyor Idler Roller Bearing

Model No. : 6204-6310

Conveyor belt rollers are one of the important parts in belt conveyor. It accounts for 35% of the total cost of a conveyor belt and has suffered more than 70% of the resistance ,so the quality of the roller is particularly important. The scope of...

 Click for details

Model No. : 6204-6310

In roller conveyors, the rollers can be made of many materials, including PVC plastic, steel, stainless steel, and aluminum. roller end bearings are often used on each end of the roller to support the shaft. Lubricantfilled hardwood can also be...

 Click for details

Model No. : 6204-6310

Portable conveyors are a flexible solution for conveying products on an incline to their destination. When pit management is a top priority and road portable equipment is a must, Portable conveyors offer efficient portable transfer solutions. Fast...

 Click for details

Model No. : 6310

Continental series belt conveyor idlers are for continuous operation, high capacities, and heavy, abrasive materials where lump size is limited by the width of the belt. roughed belt idlers may be furnished with end rolls inclined at 20°, 35° or...

 Click for details

Model No. : 6204-6310

bulk material handling systems for quarries, open-pit mining operations, and mineral processing plants. Quarry mining is the most widespread form of mining worldwide, supplying building and paving materials like dimensional stone, aggregate, cement,...

 Click for details

Model No. : 6204-6310

Bulk Material Handling Conveyors are available in trough, flat slider, and tube conveyor designs.  Adjustable skirting to ensure smooth transition of materials & prolong belt life. Impact sections are custom engineered to suit your applications....

 Click for details

Model No. : 6310

Flat Return Idler Assemblies are available in 1 or 2 roll configurations, with the 1-roll design being more prevalent. The mass of the return belt is the only load that return idlers are required to support. Frames/brackets are made from high...

 Click for details

Model No. : 6204-6310

Mining conveyor systems for open pit mines are available in stationary, shiftable and relocatable designs. Belt widths up to 3,200 mm and maximum capacities of 25,000 m³/h, including drive and transfer stations, rollers are the key spare in the...

 Click for details

Model No. : 6204-6310

Return idlers are placed at the return side of the conveying system to carry the empty belt towards the tail pulley. The return rollers are horizontal straight rollers. The spacing of return rollers is more as compared to carrier rollers, as they...

 Click for details

Model No. : 6204-6310

Troughing idler or carrier idler: Troughing idlers are the set of rollers on the material carrying side of the conveyor and are the main load bearing units of the conveying system. There are two, three or five rollers in a set mounted in a frame,...

 Click for details

Model No. : 6204

polyamide bearings are designed to operate maintenance free, thus eliminating the need for periodic lubrication. Lubricated bearings however, will exhibit a lower coefficient of friction and longer service life. Therefore, the application of grease...

 Click for details

Model No. : 6305 C3

Disc return rollers are used on the return side of the conveyor belt. They are recommended for application where material tends to build up on the belt. The pointed discs are mounted on a powder painted tube. The discs prevent material buildup and...

 Click for details

Model No. : 6306 C3

XKTE specialize in producing unique reinforced ball bearing for bulk material handling conveyor roller, they are suitable for continuous / intermittent operation in extremely humid, hot, and hostile environment. Work carried out at the factory as...

 Click for details

Model No. : 6204-6310

At work in virtually every industrial process, available in every possible shape and size, gear units and drivelines face an extremely wide range of operating requirements and conditions. But regardless of industry or application, all industrial...

 Click for details

Model No. : 6204-6310

Troughing idlers can comprise 3-roll or 5-roll idler sets, Fixed angle idler sets have end supported wings for extra strength. All rollers are interchangeable and the range offers a choice of frame. 3 roll return idler is the best and most effective...

 Click for details

Model No. : 6204-6310

Nylons have excellent fatigue resistance, low coefficient of friction, good toughness, and resist many fuels, oils, and chemicals. Bearing from XKTE has good anti seizeing and anti static properties in miningenvironmentN. use Reinforced nylon 66 raw...

 Click for details

Model No. : 6310 C3

The CEMA F idler line as a solution to extreme material capacities and material size in the bulk material handing industry. They are ideal for the toughest conveyor applications, from mining to ship-loading to any custom operation. standard...

 Click for details

Model No. : 6203 C3

Most manufacturers use 6200 series deep groove ball bearings when constructing B series idlers, and either 6300 series ball bearings or regreasable tapered roller bearings when constructing C series idlers. In general, manufacturers have...

 Click for details

Model No. : 6204

Idler supporting shaft assemblies are key limiting factors for CEMA standard load ratings. This is important, as bearings are frequently attributed as the keys to unlocking improved capacity. CEMA established these minimum standards based on...

 Click for details

Model No. : 6305

Conveyor Equipment Manufacturers Association (CEMA) established standards for the manufacturing of conveyor rollers in the 1900s. These standards have been updated over the years, and have come to encompass not only conveyor idlers, but also a host...

 Click for details