Shaft

Shaft is formed from cold drawn round bar and calibrated to ISO to ensure precise assembling of bearing. The shaft is designed to accommodate all the applied forces from the belt and / or the drive unit, with minimum deflection. The shaft is located and locked to the hubs of the end discs by means of a locking elements. The shaft is supported on both ends by bearings which are housed in plummer blocks, to support the shaft and pulley assembly on the conveyor structure.

Shafts often comprise different diameters along their length due to the bending moments and resultant deflection limitations. The diameter of the shaft at the landings for the bearings may be smaller to satisfy the necessary bearing diameter which is more cost-effective (smaller). Similarly in the case of a drive shaft, the drive attachment, may be different to the other diameters along the shaft and hence pulley shafts are often stepped.

Main Products ball bearings for Conveyor Components, shaft:

Series 60.., 62.., 63.., Open/ ZZ/2RS..

6200 Series - Light Series Ball Bearings – Balanced between space and load capacity

6300 Series - Medium Series Ball Bearings – Ideal for heavier load capacity applications

To be the first class, to do the best quality, to make users satisfied, to ensure customers relieved, are our enterprise purposes. Welcome bearing dealers` and Conveyor Idler manufacturers contact from all over the world, and become our partner.